Scanmatik 2 Pro (Basic Kit)

ÿSuitable for use with PCMFlash Modules 53/71/77 and BitBox MGD1 Benchÿ

Scanmatik 2ÿPRO isÿaÿprofessional multibrand scanner designed for the diagnostics ofÿelectronic control systems ofÿAmerican, European, Japanese, and Russian vehicles.ÿIt can be used as a J2534 deviceÿwith aÿlarge number ofÿdiagnostic programs and flashers made for standard interfaces SAE J2534 and RP1210.

New features ofÿScanmatik 2ÿPRO:

• Galvanic isolation ofÿthe USB port (with power);
• Redesigned protection ofÿK-lines and CAN buses onÿaÿnew element base;
• Increased speed ofÿwork via Bluetooth byÿabout 20%;
• Pulsed power supplies ofÿthe company?s own design (noÿheating, wide input voltage range from 5ÿtoÿ55V);
• Load-Dump power surge protection (when the generator isÿswitched off onÿaÿrunning engine).

The widest support ofÿJ2534-1/2ÿstandards:

• Supply ofÿprogramming voltage (5-24V) toÿthe OBD connector pins: 6, 8, 11, 12, 13, 14;
• ÿAUX programming voltage output (via anÿadditional cable).

For full support ofÿperipheral units onÿGM (GDS2) and VAZ/Renault cars:

• Anÿadditional CAN bus onÿpins 12-13 running inÿ12H-13Lÿor 12L-13H configuration.

Description

The device works with aÿpersonal computer, tablet, orÿsmartphone. The software for Windows and Android is included inÿthe package.ÿWhen installing the driver (included) works with third-party software made for SAE J2534 and RP1210ÿstandards. Toÿconnect toÿthe adapter both USB and Bluetooth interfaces can beÿused (built into the Scanmatik 2ÿPRO adapter).ÿThe kit includes the full current version ofÿthe program (all currently available software modules): VAZ, GAZ, UAZ, Oka, ZAZ, Daewoo, Chevrolet, Ravon, Chery, BYD, Geely, Great Wall, Lifan, Mitsubishi, Kia, Hyundai, Izh, KAMAZ, MAZ, PAZ, OBD2.ÿItÿworks with aÿlarge number ofÿdiagnostic programs and flashers made for standard interfaces SAE J2534 and RP1210.

SM2-PRO Adapter Specifications

• Interfaces for communication withÿPC (Tablet, Smartphone) - USB orÿBluetooth;
• Power supply voltage: 5... 36V from the vehicle network orÿUSB (galvanic isolation with power supply);
• Current consumption, not more than 350mA;
• Pulsed power supplies ofÿthe company?s own design (noÿheating, wide input voltage range from 5ÿtoÿ55V);
• Load-Dump power surge protection (when the generator isÿswitched off onÿaÿrunning engine).
• Supported data buses:
  • 13ÿx ISO-9141/ISO-14230 (K-LINE);
  • 1ÿx J1850VPW;
  • 1ÿx J1850PWM;
  • 4ÿx CAN;
  • 1ÿx Single Wire CAN.
• Built-in multiplexer for switching diagnostic lines;
• The widest support ofÿJ2534-1/2ÿstandards;
• Programming voltage supply (5-24V) toÿthe OBD2 connector pins: 6, 8, 11, 12, 13, 14;
• AUX programming voltage output (via anÿadditional cable);
• Bluetooth range, not less than: 10m (Classÿ2);
• Adapter dimensions (Lÿx WÿxÿH), not more than: 97ž75ž22mm;
• Weight ofÿthe device inÿthe basic configuration, not more than: 1ÿkg.

ÿ

Included in the Kit:

• Scanmatik SM2-PRO interface
• 16 pin OBD2 cable
• 12V cigar lighter power cable
• Carry case
• USB cable

** We do not sell PCMFlash or Bitbox, these can be sourced online. **

ÿ